objects that the wireless signal must pass thru may limit range. Typical ranges
vary depending on the types of materials and any background RF (radio
frequency) noise in your home or business. The key to maximizing range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the wireless Access
Point and your receiving device (i.e., the TEW-303PI) to a minimum -
Each wall or ceiling can reduce your TRENDware Wireless product's
range from 3-90 feet (1-30 meters.)
Internet Routers, and computers so that the number of walls or ceilings
is minimized.
2. Be aware of the direct line between Access Points, Internet Routers, and
computers. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle
appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks
over 42 feet (14 meters) thick! Try to make sure that the Access Points
and Adapters are positioned so that the signal will travel straight through
a wall or ceiling for better reception.
3. Building Materials make a difference - A solid metal door or aluminum
studs may have a negative effect on range. Try to position Access
Points, and computers with wireless adapters so that the signal passes
through drywall or open doorways and not other materials.
4. Make sure that the device's antenna is positioned for best reception by
using the software signal strength tools included with your product.
5. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
devices or appliances that may generate extreme RF noise.
For the average home, signal range should not be an issue. If you experience
low or no signal strength in areas of your home that you wish to access, consider
positioning the Access Point in a location directly between the computers with
wireless adapters. Additional Access Points can be connected to provide better
coverage in rooms where the signal does not appear as strong as desired.
Using radio frequency (RF) technology, WLANs (Wireless Local Area Networks)
transmit and receive data over the air, minimizing the need for wired
connections. Thus, WLANs combine data connectivity with user mobility, and,
through simplified configuration, enable movable LANs.
Position your Access Points,
8