Fig. - TRENDnet TEW-303PI User Manual

Select No, I will restart
my computer later.
and then
Click Finish
Install the TEW-303PI in computer's PCI slot
1. Make sure computer is powered off.
2. Open the computer case (please follow the instructions that comes
with your computer)
3. Locate the free PCI slot on the motherboard (PCI slots are
normally white in color and about 9 cm (3.5 inches) long) and
remove the dust cover for this PCI slot.
4. Gently insert the TEW-303PI into the PCI slot
5. Secure the card on the computer case and replace the computer
cover.
6. Attached the antenna to the TEW-303PI (turn the nut on the end of
the antenna clockwise until snug).
7. Connect the power cord to the computer.
8. Power On the computer.
Restart Your Computer
After the computer boots back up, the Found New Hardware Wizard
(Windows XP) screen will appear:
Click Next at the Found New
Hardware Wizard screen

(Fig. 5.2.4)

Select Install the software
automatically (Recommended)
and then
Click Next>
14
Fig. 5.2.3
Fig. 5.2.4