Table of Contents
Advertisement
Tx Rate: The factory setting is set to 22 Mbps; however, Tx Rate settings are
automatically determined by the TEW-303PI depending on the distance and the Tx
Rate of the access point.
Channel: Displays the radio channel information. By default, the channel is set to 1.
Radio On/Off: When necessary, click on this button to turn off the wireless radio
signal. Click on Radio On to enable the wireless signal transmission.
Link Quality / Signal Strength: Displays the Link Quality for the TEW-303PI
wireless connection to the Access Point. The Signal Strength represents the
wireless signal between the Access Point and the TEW-303PI. The percentage
coincides with the graphical bar.
Data Rate: Displays the statistics of data transmitted and received.
Configuration Utility - Configuration
This Configuration
Screen displays the
default settings for
the TEW-303PI.
To communicate on the network all devices must have the same settings
for the following properties:
SSID - (Service Set Identifier) is a name that identifies a wireless network. Access
Points and wireless clients attempting to connect to a specific WLAN (Wireless
Local Area Network) must use the same SSID. The default setting is default.
BSS Type - Click on the pull-down menu; select from the following options:
Infrastructure - connecting the WLAN using an Access Point (The default
setting.)
Ad-Hoc - wireless mode used when connecting directly to computer
equipped with a wireless adapter in a peer-to-peer environment.
Channel The default channel setting is channel 1. However, the TEW-303PI will
automatically select the channel to match the channel setting for the selected
Access Point. In Ad-Hoc mode, the channel must be manually set to the same
channel for each wireless adapter.
17
Fig. 6.4
Advertisement
Table of Contents
