Table of Contents
Advertisement
[When using Macintosh]
USING PIXE VRF BROWSER EX AND IMAGEMIXER VCD/DVD2
Pixe VRF Browser EX allo_x s you to import
the images on DVD-RAM/DVD-RW/DVD-R
recorded
on the DVD video camera/recorder
into PC as an MPEG file. ImageMixer
VCD/DVD2
allows you to
use the images imported
by Pixe VRF Browser EX to create a DVD-Video
(DVD-RW/DVD-R).
The following
shows the basic operations
of Pixe VRF Browser EX and hnageMixer
VCD/DVD2.
Refer to the electronic
instruction
manuals
that can be read on PC for detailed
instructions
of Pixe
VRF Bronx ser EX and ImageMixer
VCD/DVD2.
See the electronic
instruction
manuals
for the
detailed
use method
of each software
program.
For Pixe VRF Browser EX, click "Help"
- "Pixe VRF Browser
EX Help" while it is being started
up.
For ImageMixer
VCD/DVD2,
click the question
? mark at the top right of the folder select screen.
To start Pixe VRF Browser EX and hnageMixer
VCD/DVD2,
double-click
the "Pixe VRF Browser EX
for DVDCAM"
icon and "ImageMixerVCD/DVD2"
icon in Macintosh
HD (startup
disk) -
"Applications"
- "hnageMixer
for DVDCAM'.
Note:
• The provided software cannot be used to burn a DVD-VR (DVD-RAM/DVD-RW):It is also incompatible with a +RW.
IMPORTING IMAGES RECORDED ON DVD-RAM/DVD-RW/DVD-R
INTO PC
TO CREATE A DVD-VIDEO (DVD-RW/DVD-R)
You can use the images recorded
on the DVD video camera/recorder
to create a disc that can be
viewed
on DVD recorders/players.
* Any DVD-RW/DVD-R
recorded
on this DVD video camera/recorder
must be finalized
(see page 108).
1
Connect
this DVD video camera/recorder
to
the USB port of PC.
To save images recorded
on a disc, first insert
the disc you wish to save into the DVD video
camera/recordel;
and then connect the DVD
video camera/recorder
to the USB port of PC.
2
Start Pixe VRF Browser EX and choose the drive.
Clicking
the "Drive"
icon will display
the
drive select screen.
Choose "HITACHI
DZ-
USBHDD"
when
the power
switch
is set to
"HDD',
"Hitachi
DVD-RAM
DZ-GBX3"
when it is set to "DVD',
and then click "OK".
If you wish to change the import
device, and
continue
import,
unplug
the PC connection
cable from the PC, and then change over the
power
switch
(see page 123).
Click
_lr
_Click
132
Advertisement
Table of Contents
