Table of Contents
Advertisement
Trouble Messages
A message may appear while you are operating the DVD video camera/recorder. If a message
appears, refer to the following table and take appropriate corrective action.
Messages are arranged in alphabetical order.
Message
(1) Data error in a part
It is possible that the system cannot normally complete writing of
of image file. Repair
file when power is turned off for some reason during recording or
data now?
editing (deleting, dividing or combining scenes, or creating play
(2) Found error in image
list). Selecting "YES" will automatically repair the video file, but
file. Repair data now?
even if "NO" is selected, the same message will appear when the
(3) Data error in all
DVD video camera/recorder is turned on next time. (Do not
image file. Repair all
remove the disc while the DVD video camera/recorder is
data now?
recognising it: Ignoring this will deactivate the file repair function.)
Follow the instructions on screen, taking note of the following
cautions:
• Repair will normally be complete in several minutes, but it may
take longer (up to one hour).
• Be sure to use the AC adapter/charger to power the DVD video
camera/recorder when repairing data: Repair is not possible
using a battery. If a battery has been attached, turn the power
switch off once, connect the AC adapter/charger, and then start
repairing.
• Data may not be repaired, depending on the timing when
power was turned off.
• Data may not be repaired normally if data recorded on another
recorder is mixed in.
• The repaired data may be different from the original recorded
content because of partial deletion of defective portion.
• Since the date/time for repair is added to the repaired data
(only the corrected portion for partial repair), the original date/
time information will be lost.
• Since all movies, and then all stills, are repaired, the order of
recorded contents will be lost in case of message (2) (3) only.
• See *1 on page 136.
(1) Disc is not
A DVD-RW/+RW that was initialised by PC and not initialised for
formatted. Format the
camera use is inserted.
disc now?
(2) Disc Format. Select
record format.
(Displayed only when
DVD-RW is used.)
Auto finalizing...
This message will appear with a +RW when it is removed after
Plaese wait...
recording, or the last recorded scene was deleted. The auto-
finalised +RW can be played back on a DVD recorder/player.
Cannot combine scene. Unless consecutive scenes are selected, they cannot be
combined.
Cannot combine scene
Scenes in different programmes (different recording dates)
of multiple programs.
cannot be combined. Create a Playlist first, and then combine
Create PlayList first,
such scenes on the playlist.
and then combine
scenes.
Cause & Troubleshooting
Reference
page
—
38
107
80
80
131
Advertisement
Table of Contents
