Programme; What Is "Programme; Switching To Thumbnail Display Of Specific Date (Select) - Hitachi DZ-GX5060SW Instruction Manual

Programme

WHAT IS "PROGRAMME"?

Programme refers to an assembly of scenes recorded on the same date regardless of whether they are
movie or still.
Scene No. 1 Scene No. 2
Movie 9:00 Movie

SWITCHING TO THUMBNAIL DISPLAY OF SPECIFIC DATE (SELECT)

Since the scenes recorded on this DVD video camera/recorder are collected as "programmes" for
each recording date, selecting a programme will allow you to display only the scenes on a specific
date.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the / / /
choose "Select" on the "Program" menu
screen, and then press the
4
Select the programme
to be displayed, and
then press the
button.
The Disc Navigation
screen of the selected
programme will
appear.
88
Scene No. 3 Scene No. 4
11:45 Still
10:20 Still
Programme No. 1
Recorded on February 10
Note
• Pressing the
will restore the Disc Navigation screen.
• If a disc recorded on another device is loaded in this
DVD video camera/recorder, the programme may not
/ buttons to
be a collection of recordings on the same date.
• If you change the video quality or switch the wide
button.
mode with a +RW, multiple programmes will be
produced even if they are recorded on the same date.
S e l e c t P r o g r a m
A l l P r o g r ams
0 1 1 0 / 1 / 2 0 0 7
0 2 1 5 / 1 / 2 0 0 7
0 3 1 0 / 2 / 2 0 0 7
ENTER RETURN
0 3 10 / 2 / 2007 0 01 / 008
PLAY
Scene No. 5
13:30 Movie 17:20
Still
:
button on the "Select Program" screen
Scene No. 6
20:00