Creating Dvd-Video Using Images Recorded On Disc - Hitachi DZ-GX5060SW Instruction Manual

CREATING DVD-VIDEO USING IMAGES RECORDED ON DISC

You can use the images recorded on the DVD video camera/recorder to create a disc that can be
viewed on DVD recorders/players.
* A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalised on this
DVD video camera/recorder (see page 101).
1
Insert a disc with the recorded images to be
saved into the DVD video camera/recorder,
and connect the DVD video camera/recorder
to a USB port of PC.
2
Start ImageMixer 3.
When ImageMixer 3 starts up, the launcher
shown below will appear: Click "Create
DVD-Video".
Click
3
Click "Create New DVD".
4
Setting up project
Set up a project. You can set up the
designated save location of edited contents
and image quality.
Be sure to choose "PAL" for the video system.
After setting up the project, click the "OK"
button.
5
The screen for choosing the device to be read
will appear: Choose "Hitachi DVDCAM".
A list of devices that are built into or
connected to PC will appear: Choose "Hitachi
DVDCAM", and then click "Import".
Click
Click
121