Top Table; Cover Feeler; Thermostat - LG GC-181SA.CSWQRAN Service Manual

C. TOP TABLE
1. Unscrew 2 bolts at the rear of top table.
2. Hold the rear of top table and push forwoards with
lifting up top table slightly.
D. COVER FEELER
1. Open the eva door.
2. Pull it downwards softely by pushing the hooks of the
cover feeler inside.
3. Separate the cover feeler from the evaporator.
E. THERMOSTAT
1. Remove the shelves and Drip tray in order to make access
easier.
2. Separate Cover feeler from Evaporator.
3. Separate Cover Lamp by twisting up and down (Figure 11).
4. Loosen 1 screw holding the case to remove the Thermostat
Enclosure. (Figure 12)
5. Pull Knob Dial.
6. Pull out thermostat in the thermostat cover, and
disconnect wires. (Figure 13)
NOTE : Replace a proper specification new thermostat.
-6-