Disassembly; Door; Eva Door - LG GC-181SA.CSWQRAN Service Manual

3. DISASSEMBLY

A. DOOR
PRECAUTION
1. First unplug the appliance.
2. Remove foods and accessories like shelves or trays
which are not fixed in the refrigerator.
3. Carefully lay the appliance on a cushion like packing
material to avoid the damage of refrigeration circuit.
4. Use '+' driver or spanner to fix or remove the bolts.
1. Unscrew the 2xBOLTS ▼, then remove the hinge (L) ※.
2. Remove the LEG 〒.
3. Gently pull the door downwards to remove it.
ý Reversible
4. Before refitting the door, swap the Hinge Cap → by pulling it
out from its current location and repositioning it on the other
side of the door. Care should be taken not to damage the
adjacent surfaces when removing the Hinge Cap.
5. Unscrew the Upper Hinge pin (U) ← and screw it into the
opposite side hole.
6. After refitting the door, fix the Lower Hinge(L) in the
apposite side by using 2xBOLTS.
7. Fix the Leg.
8. Carefully place the appliance in an upright position.
Adjust the Leveling screw to make sure the appliance is
steady and check that the door opens and closes
properly.
Note: Reversing the doors is not covered by the
warranty.
B. EVA DOOR
1. Open the EVA DOOR, and Grasp the Bottom side of the
EVA DOOR Hinge.
2. Take it out forwards ※ by lifting it slightly up ▼ .
ý Reversible
3. Rotate the EVA DOOR 180 degrees, and insert EVA
DOOR to opposite side top hole first, then in to the
Bottom side hole.
4. Check that EVA DOOR is installed properly.
Figure 7
Figure 8
-5-