Specifications; Applications; Charging Method - Hitachi UC 18YG Safety And Instruction Manual

English

SPECIFICATIONS

Input power source
Charging time
Charger
Weight

APPLICATIONS

For charging the HITACHI batteries types FEB, EB7, EB9, EB12, EB14 and EB18 series.

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
1. Insert the plug of battery charger into the receptacle.
8
Single phase: AC120V 60Hz
Approx. 30 minutes .......... EB712S, EB7S, FEB7S, EB714S,
Approx. 50 minutes .......... EB7B, EB9B, EB12B, EB1220BL,
Approx. 60 minutes .......... EB924, EB1224, EB1424, EB1824L
Charging voltage .............................. DC 7.2–18V
Charging current .............................. DC 2.6A
0.7 lbs (0.3kg)
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
WARNING:
Do not use the electrical cord if damaged. Have it repaired immediately.
EB912S, EB9S, FEB9S, EB914, EB914S,
EB1212S, EB12S, FEB12S, EB1214L,
EB1214S, EB1412S, EB1414, EB1414S,
EB1812S, EB1814SL
EB14B, EB1820, EB1820L