Troubleshooting - Hisense TL3220 User Manual

Appendix

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the problem and
some solutions.
Symptoms
TV will not turn on
No picture, no sound
No sound, picture OK
Poor sound, picture OK
Poor picture, sound OK
Unable to select a certain channel
Poor color or no color
The remote control does not operate
Disorder display at power on
Possible Solutions
Make sure the power cord is plugged in, then press [POWER].
The remote control batteries may be dead. Replace the batteries.
Check if you have set the off timer.
Check the antenna/cable connections.
Press [DISPLAY] to see if you have select the right signal source.
The sound may be muted. Press
The station may have broadcast difficulties. Try another channel.
Check the speakers cable connections.
The station may have broadcast difficulties. Try another channel
Check the antenna connections.
The station may have broadcast difficulties. Try another channel.
Adjust the picture from the menu.
The channel may be skipped. See SKIP on page 14.
The station may have broadcast difficulties. Try another channel.
Adjust the HUE and COLOR in the menu.
There may be an obstruction between the remote control and the
remote control sensor.
The batteries may be installed with a wrong polarity.
The remote control batteries may be dead. Replace the batteries.
This may be caused by too short interval between power off and on.
Unplug the power and restart.
- 39 -
[ >]
on the remote control or .