Led; Inverter Information - AEG Protect PV 2000 Operating Instructions Manual

inVerter information

Model display
LCD Contrast
LCD contrast setting
LCD display lock
Waiting for
reconnect to grid
Firmware version
Setting Language
LCD display Language
MODEL PV 4600
COnTRAST
SET COnTRAST
LCD LOCKED
RECOnnEC-
TIOnxxxs
FIRMWARE xx.xx
SET LAnGUAGE
LAnGUAGE EnG

led

There are 2 LED's on Protect PV, one is green and the other is red.
normally, only the green LED switches on during operation. Their
indicated status is explained as follows:
1. Power on (green LED): It lights to indicate that Protect PV is running.
2. Fault (red LED): Illuminates during a "fault" or "failure". Details of
possible faults and their solutions can be found in the previous table.
Inverter model, xkW inverter
The top menu of LCD contrast
setting
Setting the contrast of LCD
Hold the present display
message
The time for reconnect to grid
F/W version information
Set up of the display language
Display Language of LCD
23