Panasonic AG-RT650P Operating Instructions Manual page 9

Menu Screens
One of the menu screens appears on the TV monitor when the MENU/REC LOCK switch is set to MENU. The display
returns to the regular screen when this switch is set to OFF.
• When a menu screen has appeared, the items are set using the page, shift and set buttons.
• Advance through the pages ("page up") of the menu screen using the page button.
• Move the items (downward or toward the right) using the shift button.
• Change the items (increment or decrement the values) using the set button.
MENU SCREEN 1
[TIME ADJUST] P1
1-01-2000 SAT
0:00:00
[REC LOCK]
MODE : OFF
[HOUR METER]
00000H
MENU SCREEN 4
[REC MODE] P4
REC T-MODE : OFF
TAPE IN : STOP
TAPE END : STOP
[VIDEO MODE]
MODE : AUTO
DETAIL : ON
MENU SCREEN 1
In addition to the date and time display and the recording mode lock setting which appear on the TV monitor, the hour
meter is displayed on Menu Screen 1.
q
Date setting (see page 12)
w
Time setting (see page 12)
e
Recording mode lock
MENU SCREEN 2
The time/date display position, monitor screen blue display and buzzer settings are performed on Menu Screen 2.
t
Display position selection (see page 13)
This selects the position where the date and time
are to be displayed on the TV monitor.
↔
(L-UPPER R-UPPER
R-BOTTOM ↔ CENTER ↔ OFF ↔ L-UPPER...)
y
Blue display
This sets a blue display on the monitor screen at all
times except while recording or playback is in progress.
BLUE: The display on the monitor screen is blue at all
times except while recording or playback is in progress.
CAMERA: The pictures from the video input con-
nector are shown on the monitor screen at all times
except while playback is in progress.
u
Setting of the buzzer sound
ALARM: The buzzer sounds once alarm recording
is performed.
TAPE END: When the tape end is reached in the
recording mode, the buzzer sounds while the tape is
at the end.
TAPE REMAIN: The buzzer sounds when there is
only about 3% (with an NV-T120/T160 tape) of the
MENU SCREEN 2
[DISPLAY]
q
POSITION : L-UPPER
w
[REC INDICATE]
NOT REC : CAMERA
e
[BUZZER]
ALARM : OFF
r
TAPE END : OFF
TAPE REMAIN : OFF
ERR WARN : OFF
MENU SCREEN 5
[INTERNAL TIMER REC]
!2
!3
[TIMER]START END
!4
SUN OFF
MON OFF
TUE OFF
!5
WED OFF
!6
THU OFF
FRI OFF
SAT OFF
DLY OFF
↔
L-BOTTOM
MENU SCREEN 3
P2 [ALARM]
t
MODE : OFF
DURATION : 30SEC
y
[RECALL] -
-
-
-
u
[OUTPUT SELECT]
TERMINAL OUT : ERR WARN
MENU SCREEN 6
P5 [DAYLIGHT SAVINGS]
MODE : OFF
!7
T-M
[START]
WEEK :1ST-SUN
MONTH:
TIME : 2:00
[DIRECT SEARCH]
MODE : OFF
ON: LOCK on the front display tube flashes up, and
all operations except for REC REVIEW are
prohibited while recording is in progress.
r
Hour meter (see page 5)
This indicates the unit's total operation time (the
cumulative total for the cylinder rotation time).
tape remaining before the end is reached in the
recording mode.
ERR WARN: The buzzer sounds when the unit is
↔
set to the warning status.
To release the buzzer:
ALARM: Release alarm recording.
TAPE END: Transfer the mode from the tape end or
press the STOP button.
TAPE REMAIN: Transfer the mode (but not to
PAUSE or REC REVIEW) from the recording mode
or press the REC button.
ERR WARN: Release the warning status.
• When TAPE END or TAPE REMAIN has been set to OFF, the
buzzer will not sound; however, the REMAIN display will
remain lit or flashing.
• When TAPE END or TAPE REMAIN has been set to ON,
REMAIN lights or flashes on the display tube at the same time
as buzzer sounds.
They cease flashing when the buzzer is released.
Note:
The remaining tape is displayed only with NV-T120 and NV-T160
tapes. It is not displayed when any other tapes are used.
9
P3
i
o
!0
!1
P6
!8
!9
@0
[ END ]
LST-SUN
4 10
2:00
@1