Panasonic AG-RT650P Operating Instructions Manual page 24

Troubleshooting
The power has been restored after a
power failure but recording does not
automatically resume.
Recording cannot be stopped.
1-week programmed timer recording
cannot be conducted properly.
One or more cameras do not record
when a multiple number of cameras are
used.
No auto repeat recording.
No timer recording.
No alarm recording.
Noise sometimes appears on the
playback pictures.
Dirty playback picture.
"Snow" on playback picture.
While a multiple number of cameras are
being used, two scenes appear as the
playback picture when the cameras are
switched.
Recording starts when the unit's power
plug is connected to or disconnected
from the power outlet.
No playback because recording starts
when the main power for the connected
equipment is set to ON.
• Has the power failure lasted a long time (more than 1 week)?
Set the timer recording switch to EXT to ensure that the unit is
set to the recording mode even after a prolonged power failure.
• First set the MENU/REC LOCK switch to OFF and then operate.
• Is REC LOCK on Menu Screen 1 at OFF?
• Are the date and time on the regular displays correct?
(See page 12)
• Turn the time adjustment control on the sequential switcher, and
adjust it to a setting which is longer than the video recording
duration in the recording time mode.
• Connect a camera switching cable between the unit and
sequential switcher. (See page 21)
• Has the stop button been pressed during auto rewinding?
• Are the present time and start/stop times for the timer recording
correct?
• Has INT or EXT lighted on the display?
• Have the alarm sensors and alarm input connectors been
connected properly?
• Has the alarm recording mode been selected on Menu Screen 3?
Trouble with playback
• Adjust the tracking buttons. (See page 22)
• The video heads may be dirty or clogged or they may have
reached the end of their service life. Consult with your dealer.
• The video heads may be dirty or clogged. Consult with your
dealer.
• Has the camera switching signal cable been connected
properly?
• Has INT or EXT lighted on the display?
• Has INT or EXT lighted on the display?
24