SHOWER SYSTEMS TWO WAY OR THREE WAY IN-WALL DIVERTER Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. CAUTION: DO NOT SEAL ANY OUTLETS. DIVERTER TWO WAY BODY DISK...
Page 2
ROUGHING-IN Turn off hot and cold water supplies before beginning. See Roughing-in Drawing on reverse side. The port with the BATH TUB picture is the high flow. The DIVERTER can be installed with the inlet rotated in any position. Supply connections are 1/2" NPT connections. For proper positioning the finished wall must be within side of PLASTER GUARD.