Parameter Copy - High End Systems Universal Controller Owner's Manual

Parameter Copy

Copies Position and other Constructs from one
Address to different Address on same Page
• From READY window, Press SELECT
• Press Position Down key
• Select source Address
• Select destination Addresses
• Mark Constructs to be copied using the Adjust 1
key
• Press RECORD
Address Copy
Copies all Constructs from selected Addresses to a
different Page
• From READY window, press SELECT
• Select Address of one fixture type to be copied
• Press either Adjust 2 Key
• Select any other Addresses to be copied
• Press Adjust 2 keys to select destination Page
• Press RECORD
25