Aztech Easy Start Manual page 13

To connect to a local HomePlug:
1. Select a HomePlug listed in Local Devices on your computer.
2. Click Connect. After connection, a message showing the HomePlug MAC Address is
displayed on top of the Connect button.
To change the device name:
1. Select a remote HomePlug.
2. Click Rename.
3. Enter the new name.
To enter the device password:
1. Select a remote HomePlug.
2. Click Enter Password.
3. Enter the Device Password. The Device Password is printed on the sticker label on
the HomePlug itself.
To add devices in the list:
1. Click Add. This opens Add Device to Network.
Add Device To Network
2. Enter the Device Name.
Easy Start Guide
Page 13 of 19