ATCOM AT810 Quick Start Manual page 8

AT810 AT810 Quick Quick Start Start
AT810 Quick AT810 Quick Start Start Guide
� Server Server: SIP server address , support both IP address and domain
name.
� Server Port: SIP server port , default is 5060.
� Use Outbound Proxy: Whether to use outbound proxy.
� Outbound Proxy Server： Normally the Proxy server is the same as SIP server.
If they are different then fill in the correct information that provided by ISP.
� Outbound Proxy Port: Set your proxy server port.
� Register Expires: register expire time, default is 60 seconds. AT810 will
auto configure this expire time to the server recommended setting if it is
different from the SIP server.
� Subscribe Expires: The Expires value in SUBSCRIBE message, default is
3600 seconds.
� SIP 100Rel Require : Require 100rel or not, default is no. If set to yes, the
INVITE message sent will contain the require:100rel header field.
� Transport Type: UDP/TCP/TLS.
After configured and enabled register this account, please check the status of
this account in System Status page.
ATCOM TECHNOLOGY CO., LIMITED
Guide Guide
Guide