Nvidia Quadro K4000 User Manual page 22

•
To synchronize the frame rate of the SDI output to the external signal using frame
lock, select Frame-accurate synchronization using this format, then click the
list arrow and choose from the list of available SDI signal formats.
•
To introduce a delay in the SDI output, enter the pixel or line delay values in the
appropriate HSYNC or VSYNC delay boxes.
See "Synchronizing the SDI Output to an External Source" on page 19
information.
4
Check the Terminate the analog signal at this connector check box if
•
the system is a standalone system synchronized to a house sync signal, or
•
the system is the last in a chain of systems connected to the same house sync signal.
5
Choose the SDI output data format by clicking the SDI output format list arrow and
then selecting from the list of available color formats.
6
Click OK when done to close the dialog box.
7
Click Apply.
Quadro K4000/K5000/K6000 SDI
Chapter 03 : Windows–Using the Graphics to SDI Control Panel
for additional
DU-05337-002_v01 | 18