Save These Instructions - NewAir AH-600 Owner's Manual

14. Use this heater only as described in this manual. Any other use not recommended
by the manufacturer may cause fire, electric shock, injury to persons or other
damage to property.
15. To prevent overload and blown fuses, be sure that no other appliance is plugged
into the same outlet or into another outlet wired into the same circuit.
16. It is normal for the heater's plug and cord to feel warm to the touch. A plug or
cord which becomes hot to the touch or becomes distorted in shape may be a
result of a worn electrical outlet. Worn outlets or receptacles should be replaced
prior to further use of the heater. Plugging heater into a worn outlet may result in
overheating of the power cord or fire.
17. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping
it over.
18. Be sure that the plug is fully inserted into appropriate outlet. Please remember
that outlets also deteriorate due to aging and continuous use: check periodically
for signs of overheating or deformation of the plug. Do not use the outlet and call
your electrician.
19. Check that neither the appliance nor the power cable has been damaged in any
way during transportation.
20. Make sure that no pieces of polystyrene or other packaging material have been left
between elements of the appliance. It may be necessary to pass over the appliance
with a vacuum cleaner.
21. Always plug heater directly into a wall outlet/receptacle. Never use with an
extension cord or relocatable power tap (outlet/power strip).
CAUTION:
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. SAVE THESE
INSTRUCTIONS

SAVE THESE INSTRUCTIONS

4