Set Phone Number Announcing; Ringer Volume; Tone Or Pulse Dialing Mode; Mixed Dialing (Tone And Pulse Dialing) - Serene HD-50JV Operating Manual

Set Phone Number
Announcing On / Off
When dialing from a memory, both the memory name and
its phone number will be announced. However, the phone
number portion may be deleted so only the memory name is
announced.
1. While off-line, press and hold
second to enter function setting mode. You hear a voice
confirmation "Program, Program".
2. Press "# 3" to hear current phone number announcing
setting (On / Off).
3. Press "#" to toggle this setting.
4. Press
again to save new setting and then exit. An
"OK" announcement confirms exit to off-line mode.

Ringer Volume

A three position ringer loudness switch is located on the side
of the phone.
12
Mixed Dialing
(Pulse and Tone dialing)
Certain applications, like banking or voice mail retrieval, require
the use of DTMF tone while the phone is set for pulse dialing.
After pulse dialing, pressing "*" key temporary changes the
keypad into tone mode for banking or voice mail retrieval. It will
automatically return to pulse dialing on the next call.
key for about 3

Tone or Pulse Dialing Mode

1.
2.
3.
4.
While off-line, press and hold
seconds to enter function setting mode. You hear a
voice confirmation "Program, Program". (Assume " Voice
Announce" function is OFF).
Press "# 1" to hear current dialing mode setting as either
"1" or "2" (1 = Tone, 2 = Pulse).
Press "#" to toggle this setting.
Press again to save new setting and then exit. An
"OK" announcement confirms exit to off-line mode.
key for about 3