Related Manuals for Serene HD 40S
Summary of Contents for Serene HD 40S
- Page 1 HIGH DEFINITION AMPLIFIED TELEPHONE Operating Guide Manuel de l’utilisateur HD 40S Copyright © 2008 Serene Innovations, Inc. All rights reserved. 06-08...
-
Page 2: Important Safety Instructions
Important safety Instructions When using telephone equipment or electric appliances, basic precautions should always be followed to reduce the risk WARNING – of fire, electrical shock and injury to persons, including the following: Read all the instructions before using the appliance. Unplug from outlet when not in use and before servicing or cleaning. -
Page 3: Package Contents
English Package Contents Your package includes all the items as shown here. If there is anything missing, please contact our Customer Care Department immediately. Note: Use only a class 2 power adapter, 9 vdc, 300 ma... - Page 4 Connections Connect your phone as shown. When finished, lift handset to test. If you hear a dial tone, your telephone is ready. If not, check all connections again.
-
Page 5: Wall Mounting
English Wall Mounting Slide out the handset hook, turn it upside down and reinsert. This hook keeps the handset in place when wall mounted. Fit the wall mount bracket into the base of the phone. Connect the short phone cord. Align and put the mounting holes over the heads of the wall plate screws (make sure the screw head protrude enough, if not, use a screw driver to adjust) and slide the phone downward slightly to lock the phone in place. -
Page 7: Feature Identification
English Feature Identification Handset hook (for wall mounting use only). Ringer Tone (to select a ring tone to suit your hearing). One-touch memory dialing buttons. Out Amplifier (button to manually turn the amplifier On or Off for out-going speech amplification. The ring around the button Hold (press to put call on hold and to mute the handset, lift the will light up when the Amplifier is On). -
Page 8: Amplifying Outgoing Speach Automatically
Amplifying Outgoing Speach Amplifying Incoming Automatically Sound Set the Amplifier Auto On/Off switch the first time you use the phone, it will Slide this control until you hear on the underside to the On position. return to the same setting every time comfortably. - Page 9 English Amplifying Outgoing Speach Manually Set the Amplifier Auto On/Off to Off. The Out Amplifier will turn off automatically when you hang-up. While on the phone, press the Out-going Amplifier button to turn it On. Adjust the Out Volume Control if necessary until the other party can hear you clearly.
- Page 10 Programming Number for One-Touch Memory Dialing Lift the handset, press PROG. Dial the phone number you wish to save (maximum of 15 digits). Press PROG again. Press the memory button you wish to store the phone number, then hang up the phone.
- Page 11 English Insert Photo in Memory Button Cut your photos using the template provided as a guide. Lift the transparent cover of the memory button and insert the photo. Replace the cover when finished.
-
Page 12: Troubleshooting
Troubleshooting If you encounter any difficulties, please check the following before calling our Customer Care Department for assistance. The phone does not ring or rings very soft when there is an incoming call Check and make sure the ringer volume switch on the side of the phone is set to HI or MED. If this switch is set to LO, the phone rings very soft. -
Page 13: Warranty Service Information
HD Phone fails to function properly within one year of original purchase due to defects in materials or workmanship, return the unit (freight prepaid) with proof of purchase (sales receipt or packing slip, no exceptions) to Serene Innovations. Serene Innovations will either repair or replace the unit (with a refurbished unit or unit of equal condition) and return it to you (using UPS/ USPS ground shipping) at no cost to you if the unit is returned within 30 days of purchase. -
Page 14: Fcc Compliance
Operating Environment for Home or Office Use to one line should not exceed five (5.0). To be Serene Innovations, Inc. at 562- 407 5400. Please certain of the number of devices you may connect note that the telephone company may ask that you... - Page 15 English which can be determined by turning the equipment Before installing this equipment, users should ensure the appropriate electric inspections authority, or off and on, the user is encouraged to try to correct the that it is permissible to be connected to the facilities electrician, as appropriate.
- Page 16 Serene Innovations, Inc. 13421 Pumice Street Norwalk, Ca. 90650 (562) 407-5400 www.sereneinnovations.com...
Need help?
Do you have a question about the HD 40S and is the answer not in the manual?
Questions and answers