Honda Pilot 2009 Owner's Manual page 497

Main Menu
Replacing a Rear License Plate
Bulb
SCREWDRIVER
1. Using a cloth to prevent scratches,
insert a small flat-tip screwdriver
between the left edge of the lens
and the housing. The lens will
come down.
2. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
Table Of Contents
LENS
CLOTH
3. Turn on the parking lights and
check that the new bulb is
working.
4. Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.
BULB
LENS
2009 Pilot
Lights
493