Driving Position Memory System; See Pages 37 - Honda Pilot 2009 Owner's Manual

Main Menu
On Touring models
Your vehicle has a memory feature
for the driver's seat and outside
mirror positions.
Two seat and outside mirror
positions can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).
You can change the ''MEMORY
POSITION LINK'' setting on the
multi-information display (see page
107
).
Table Of Contents
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
1. Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
2. Adjust the seat to a comfortable
position (see page
3.
Adjust the outside mirrors for best
visibility (see page

Driving Position Memory System

152
).
169 ).
2009 Pilot
MEMORY BUTTONS
SET BUTTON
4. Press and release the SET button
on the control panel. You will hear
a beep. Immediately press and
hold one of the memory buttons (1
or 2) until you hear two beeps.
The indicator in the memory
button will come on. The current
positions of the driver's seat and
outside mirrors are now stored.
CONTINUED
171