Honda Pilot 2009 Owner's Manual page 375

Main Menu
To delete a paired phone, do this:
1. Press and release the Talk button.
After the beep, say ''Phone setup.''
The HFL response is ''Phone
setup options are status, pair, edit,
delete, and list.''
2. Press and release the Talk button.
After the beep, say ''Delete.'' The
HFL response is, ''Which phone
would you like to delete?''
3. Press and release the Talk button.
After the beep, say the name of
the phone you want to delete. For
example say ''Eric's phone.'' The
HFL response is ''Would you like
to delete Eric's phone?''
4. Press and release the Talk button.
After the beep, say ''Yes.'' The
HFL response is ''Preparing to
delete Eric's phone. Say OK to
continue, otherwise, say Go back,
or Cancel.''
Table Of Contents
5. Press and release the Talk button.
If you say ''OK'' after the beep, the
HFL response is ''The phone has
been deleted. Returning to the
main menu.'' If you say ''Go back,''
or ''Cancel,'' the phone will not be
deleted.
To list all paired phones, do this:
1. Press and release the Talk button.
After the beep, say ''Phone setup.''
The HFL response is ''Phone
setup options are status, pair, edit,
delete, and list.''
2. Press and release the Talk button.
After the beep, say ''List.'' The
HFL responds by listing the name
of each paired phone. When all
phones paired to the system have
been read, the HFL response is
''The entire list has been read.
Returning to the main menu.''
2009 Pilot
Bluetooth HandsFreeLink
To find out the status of the phone being
used, do this:
1. Press and release the Talk button.
After the beep, say ''Phone setup.''
The HFL response is, ''Phone
setup options are status, pair, edit,
delete, and list.''
Press and release the Talk button.
2.
After the beep, say ''Status.'' An
example of the HFL response is,
''Eric's phone is linked. Battery
strength is three bars. Signal
strength is five bars, and the
phone is roaming. Returning to the
main menu.''
CONTINUED
371