Set Eye-Fi SD Card Connection Mode
This camera supports wireless connection of
an Eye-Fi SD Card. Enable Eye-Fi connection by
following below steps.
. Press the
button, press the left /right arrow
func
menu
button to select
to enter the menu.
2. Press up/down arrow button to select
press the
button or right arrow button to
enter the menu.
3. Press the up/down arrow button to select
「Eye-Fi」and press the
arrow button to enter the menu.
4. Press the up/down arrow buttons to select
「On」or「Off」and press the
confirm.
84
and press the
button
and
button or right
button to
USB
US B
PC
PC
Off
TV System
TV System
On
N T SC
NTSC
Eye-Fi
Of f
Off
If the Eye-Fi card is not present in the
camera, this feature is not displayed.