GE X450 User Manual page 97

Message
Warning! Do not turn
off your camera during
update!
Remove USB Cable!
Connection Failed!
Write Protect !
Card Full !
Memory Full !
96
Description
The message appears during the
firmware update process.
Indicates that you can disconnect
the USB cable.
Failure to connect to your PC, printer, TV.
The SD card is locked.
Indicates that the SD card is full.
Indicates that the camera memory
is full.
Action
The message disappears after the
camera update and restart.
The message disappears after you
disconnect the USB cable.
Remove USB cable and retry connection.
Remove SD card and switch the lever on
the side of card to UNLOCK. The message
will disappear after 2 seconds.
Replace SD card with another that has
available memory. The message will
disappear after 2 seconds.
It disappears after 2 seconds.