Video System; Set Eye-Fi Sd Card Connection Mode - GE G100 Power PRO Series User Manual

Video System

Use this feature to switch the video system from either NTSC
or PAL.
1. Select Video System in the Transmission menu, then
press Right.
2. Use the Up/Down navigation buttons to select NTSC or
PAL. Then press the
The video output signal can be switched to NTSC or PAL to
accommodate different regional TV standards. The appropriate
setting will vary between regions.
NTSC:
USA, Canada, Taiwan, Japan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
Note:
The TV output will not display properly if an incorrect
video system is selected.
70 70
button to confirm.

Set Eye-Fi SD Card Connection Mode

This camera supports wireless connection of an Eye-Fi SD
Card. Upload the photos from the camera to the Internet using
the following steps:
1. Press button to select set menu, then enter connection
func
menu
menu to select Eye-Fi, select ON.
2. Photos taken after this setting is enabled will be
automatically uploaded to the internet. Please refer to the
Eye-Fi SD card instructions and settings for further details.