Speaker Components; Installing The Speakers On The Tallboy Stand - Samsung HT-E4530 User Manual

Connections

Speaker Components

Speaker Components
(L) (R)
FRONT STAND

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and
connect it to the Stand.
2. Use the driver to combine the screws on the 3
marked holes.
3. Straighten a supplied speaker wire and put in
the hole on the center of Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw clockwise into the hole on the
rear of the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
16
|
English
STAND BASE
(L) (R)
SCREW (5
SURROUND
1
Stand Base
Stand
3
5
SPEAKER CABLE
15): 8EA
X
CENTER SUBWOOFER
2
4
Speaker
Stand
6