Input / Support; Input Menu - Samsung LCD TV User Manual

Contents (when Source is set to USB)
■
You can select a folder on the USB Device with music or photo files to be played when the TV turns on automatically.
If the folder name is too long, the folder can not be selected.
N
If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read.
N
Repeat
■
Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
When Manual is selected, press the ► button to select the desired day of the week. Press the ENTERE button over the
N
desired day and the c mark will appear.
You can set the hour, minute and channel by pressing the number buttons on the remote control.
N
Auto Power Off
N
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is
on for too long time.

INPUT / SUPPORT

Input Menu

¦
Source List
❑
Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your
choice.
Press the SOURCE button on the remote control to view an external signal source. TV
O
mode can be selected by pressing the TV button.
You can also watch HDMI mode simply by pressing the HDMI button on the remote control.
O
TV / AV / AV / Component / Component / PC / HDMI / HDMI / HDMI/DVI / HDMI /
■
USB
You can choose only those external devices that are connected to the TV. In the Source
N
List, connected inputs will be highlighted and sorted to the top. Inputs that are not
connected will be sorted to the bottom.
Using the Colour buttons on the remote with the Source list
N
• Red (Refresh): Refreshes the connected external devices. Press this if your Source is
on and connected, but does not appear in the list.
•
TOOLS (Tools): Displays the Edit Name and Information menus.
PC always stays activated.
N
Edit Name
❑
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray
■
/ HD DVD / DMA
Name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN (DVI) port, you should set the HDMI/DVI
N
mode to DVI PC in the Edit Name of the Input mode.
When connecting an HDMI/DVI cable to the HDMI IN (DVI) port, you should set the HDMI/DVI mode to DVI or DVI PC in
N
the Edit Name of the Input mode. In this case, a separate sound connection is required.
English - 
Source List
Edit Name
Source List
TV
PC : - - - -
AV1 : - - - -
AV2 : - - - -
Component1 : - - - -
Component2 : - - - -
Refresh T Tools