Channel; Channel Menu - Samsung LCD TV User Manual

CHANNEL

Channel Menu

¦
Area
❑
You can change the area for channels.
Auto Store
❑
You can scan for the frequency ranges available to you (and availability depends on your
area). Automatically allocated programme numbers may not correspond to actual or desired
programme numbers.
If a channel is locked using the Child Lock function, the PIN input window appears.
N
Scans for all channels with active broadcast stations and stores them in the TV's memory.
N
If you want to stop Auto Store, press the ENTERE button.
N
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTERE button.
Manual Store
❑
Scans for a channel manually and stores it in the TV's memory.
N
If a channel is locked using the Child Lock function, the PIN input window appears.
N
● Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
● Colour System → Auto / PAL / SECAM / NTSC4.43 / NTSC 3.58: Sets the colour system value using the ▲ or ▼ button.
● Sound System → BG / DK / I / M: Sets the sound system value using the ▲ or ▼ button.
● Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
You can also select the channel number directly by pressing the number (0~9) buttons.
N
If there is abnormal sound or no sound, reselect the sound standard required.
N
● Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
● Store (When you store the channel and associated programme number): Set to OK by pressing the ENTERE button.
Channel mode
N
• P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
•
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
•
S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Channel List
❑
For detailed procedures on using the Channel List, refer to the 'Managing Channels' instructions. (refer to pages 10~11)
You can select these options by simply pressing the CH LIST button on the remote control.
O
Channel Mode
❑
When press the P >/< button, Channels will be switched within the selected channel list.
Added Ch.
■
Channels will be switched within the memorized channel list.
Favourite Ch.
■
Channels will be switched within the favourite channel list.
Fine Tune
❑
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the
N
channel banner.
To reset the fine-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTERE button.
N
Only TV channels can be fine tuned.
N
English - 
Area : Asia/Europe ▶
Auto Store
Manual Store
Channel List
Channel Mode : Added Ch.
Fine Tune