Adjusting The Volume; Viewing The Display; Viewing The Menus - Samsung LA40M86BD Owner's Instructions Manual

using the PrE-Ch button to select the Previous Channel
1. Press the PrE-Ch button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then
use the PrE-Ch button to quickly alternate between them.

adjusting the Volume

using the Volume buttons
1. Press the Vol
or Vol
using the mutE button
At any time, you can cut off the sound using the mutE button.
1. Press mutE button and the sound cuts off.
The " " is displayed on the screen.
2. To turn mute off, press the mutE button again or simply press the
Vol or Vol button.

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.
1. Press the Info button on the remote control.
Press the Info button once more or wait approximately 10 seconds and the
display disappears automatically.

Viewing the menus

1. With the power on, press the mEnu button.
The main menu appears on the screen. The menu's left side has icons:
Picture, Sound, Channel, Setup, Input, Application.
2. Use the ▲ or ▼ button to select one of the icons.
Then press the EntEr/oK button to access the icon's sub-menu.
3. Press the ExIt button to exit.
The on-screen menus disappear from the screen after about one minute.
button to decrease or increase the volume.
English - 0
tV GlobohD thu 6 Jan 0:0 am
DTV Air
now_Event(/), Ver(/6) : It sho...
05.
♥
now_Event(/), Ver(/6) : Extended Event text...It should be less then  bytes
and 80 standard size characters, the total number of aPr codes used in the
mode : Dynamic
Backlight : 10
Contrast : 100
Brightness : 45
Sharpness : 75
Colour : 55
Tint (G/R) : G50/R50
Detailed Settings
 080i multi
10:00 am - 11:00 am