Turning The Tv On And Off; Plug & Play Feature - Samsung LA40M86BD Owner's Instructions Manual

operation

turning the tV on and off

Press the PoWEr button on the remote control.
You can also use the PoWEr
Plug & Play feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently:
1. Press the PoWEr button on the remote control.
The message "當第一次設置電視或重置電視後執行即插即用功能，設置頻道，時鐘
和其他功能" is displayed.
2. Press the EntEr/oK button.
The message"Select the OSD Language"is displayed
Select the appropriate language by pressing the ▲ or ▼ buttons.
Press the EntEr/oK button to confirm your choice.
3. The message "Select Home Use when installing this TV in your home." is
automatically displayed.
Press the ◄ or ► button to select "Store Demo" or "Home Use", then
press the EntEr/oK button.
We recommend setting the TV to "Home Use" mode for the best picture in your
home environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to "Store Demo" mode and you want to return to
"Home Use" (Dynamic) mode, press any Volume button and then hold down the
mEnu button for five seconds on the side panel of the TV.
4. The message "Select the antennas to perform Auto Store for." is displayed.
Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the EntEr/oK button to select "Start".
If the antenna is connected to ANT 1 IN (AIR), select "Air" and if it is connected
to ANT 2 IN (CABLE), select "Cable".
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the
"Air + Cable".
5. The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto Store menu reappears.
Press the EntEr/oK button when channel memorization is complete.
The message "Set the Clock mode." is displayed.
To stop the search before it has finished, press the EntEr/oK button with
"Stop" selected.
6. Press the EntEr/oK button.
Press the ▲ or ▼ button to select "Auto", then Press the EntEr/oK button.
If you select "Manual", "Set Clock Mode." is displayed. (See page 39)
button on the TV.
English - 8
即插即用
當第一次設置電視或重置電視後執行即插即用功能，設置頻
道，時鐘和其他功能
確定
Plug & Play
Selected the OSD Language.
English
Menu language :
中文
Move
Plug & Play
Select "Home Use" when installing this TV in your home
Store Demo Home Use
Move
Plug & Play
Select the antenna to perform Auto store for.
Air
Cable
Air + Cable
Move Enter
Plug & Play
Auto store in progress. Cable 59
Air Digital : -- Cable Digital : --
Analog : -- Analog : --
Stop
Enter
Plug & Play
Auto store is completed.
3 channels are memorized.
Air : 1 Cable : 2
OK
Enter
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
Auto
Manual
Move
進入
Enter
Enter
Start
Start
Start
Skip
3%
Skip
Skip
Enter