Table of Contents
Advertisement
What is HDMI?
- "High Definition Multimedia interface" allows the transmission of high definition digital video data
and multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable
Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older
HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the
DVI IN (HDMI2) "R-AUDIO-L" jacks on the back of the TV. If this happens, contact the company that provided
the DVD player/Cable Box/Satellite receiver to confirm the HDMI version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
DVI In (hDmI 2) (r-auDIo-l)
- DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
480i
HDMI/DVI 50Hz
X
HDMI/DVI 60Hz
X
Component
O
4 ant In
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is connected,
the sound from the built-in speakers will be disabled.
6 S-VIDeo or VIDeo / r-auDIo-l
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on your set and the other ends to corre
sponding audio out connectors on the A/V device.
7 PC In (PC)/(auDIo)
- Connect to the video and audio output jack on your PC.
8 DIgItal auDIo out (oPtICal)
- Connect to a Digital Audio Component.
9 SerVICe 2
- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing
angle using your remote control.
0 ComPonent In 1, 2
- Connect component video cables (optional) to component connector ("P
and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the
DTV (or DVD) and connect the DTV (or DVD) to component connector ("P
- The P
, P
and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and
R
B
R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 1080p mode.
- This LCD TV displays its maximum picture resolution in 1080p mode.
! Kensington lock (depending on the model)
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
@ SerVICe 1
- Service connection for qualified service engineer.
480p
576i
X
X
O
X
O
O
english -
576p
720p
O
O
X
O
O
O
", "P
R
", "P
R
1080i
1080p
O
O
O
O
O
X
", "Y") on the rear of your set
B
", "Y") on your set.
B
Advertisement
Table of Contents
