Table of Contents
Advertisement
the teletext pages are organized according to six categories:
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
Press the tV/DtV button to exit from the teletext display.
Setting up Your remote Control
after it has been set up properly, your remote control can operate in
five different modes: tV, DVD, Cable, Set-top box, VCr. Pressing the
corresponding button on the remote control allows you to switch
between these modes, and control whichever piece of equipment you
choose.
The remote control might not be compatible with all DVD Players,
VCRs, Cable boxes, and Set-Top Boxes.
Setting up the remote to operate Your VCr, Cable, DVD and Stb
1. Turn off your VCr, Cable, DVD and Stb.
2. Press the VCr, Cable, DVD and Stb button on your TV's remote
control.
. Press the Set button on your TV's remote control.
. Using the number buttons on your remote control, enter three digits of the
VCR code listed on pages 41~43 of this manual for your brand of VCR.
Make sure you enter three digits of the code, even if the first digit is a "0".
(If more than one code is listed, try the first one.)
. Press the PoWer
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try
one of the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
button on the remote control.
english - 0
Advertisement
Table of Contents
