Table of Contents
Advertisement
updating the Channel list automatically
You can update the channel list when the broadcaster
adds new Services or if you move the tV to a new
location.
1. Press the D.menu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press
the enter/oK button.
. Press the enter/oK button again, to select
"Auto Store".
Press the enter/oK button.
When it has finished, the number of scanned services
will be displayed.
The existing favourite channel list will not be deleted
when the channel list is updated.
To stop the scan before it has finished, press the
enter/oK button with "STOP" selected.
. Press the exIt button to exit.
If the signal status is poor, the "No Service found!
Check the aerial connection" message is displayed.
updating the Channel list manually
You can specify the channel for a fast channel search.
1. Press the D.menu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press
the enter/oK button.
. Press the ▲ or ▼ button to select "Manual Store", then
press the enter/oK button.
. Press the ▲ or ▼ button to select the required option,
then press the enter/oK button.
− Channel : Channel "21-69" in sequence are displayed
− Frequency : The frequency available in the Channel group is displayed.
− bandwidth : The available bandwidths are 7 and 8 MHz.
Press the red button to start the scan for digital services.
When it has finished, channels are updated in the channel list.
. When it has finished, the number of scanned services will be displayed.
. Press the exIt button to exit.
in Singapore.
english - 2
Channel
auto Store
manual Store
edit Favourite Channels
Channel list
move
enter
mode
: Custom
auto Store
equalizer
SrS tS xt
: off
auto Volume
: off
Scanning for digital services...
Internal mute
: off
reset
Services found: 2
Channel:
Stop
move
enter
return
return
manual Store
Channel
Frequency
bandwidth
▲
5
100
Khz
▼
Search
adjust
return
return
%
mhz
Advertisement
Table of Contents
