Table of Contents
Advertisement
Plug & Play
When the tV is initially powered on, several basic settings
proceed automatically and subsequently. the following
settings are available.
1. Press the PoWer
The message "Start Plug & Play" is displayed with "OK"
selected. Press the enter/oK button.
2. Press the ◄ or ► button to select "Shop" or "Home", then
the enter/oK button.
We recommend setting the TV to Home mode for the
best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the menu button for five seconds on the side
panel of the TV.
. The message "Check antenna input." is displayed with "OK" selected.
Press the enter/oK button.
Please check that the antenna cable is connected correctly.
. The message "Some DTV functions may not be available. Digital Scan?" is displayed.
Press the ◄ or ► button to select "Yes" or "No", then press the enter/oK button.
Yes: First an ATV search is performed and then a DTV ch. auto search is performed.
no: Only an ATV search is performed.
. The "Auto Store" menu is displayed with the "Start" selected. Press the enter/oK button.
The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV.
After all the available channels are stored, the "Clock Set" menu appears.
Press the enter/oK button at any time to interrupt the memorization process.
. Press the enter/oK button.
Select the "Month" , "Day" , "Year", "Hour" or "Minute" by pressing the ◄ or ► button.
Set the "Month" , "Day" , "Year", "Hour" or "Minute" by pressing the ▲ or ▼ button.
You can also set the "Month", "Day", "Year", "Hour" and "Minute" by pressing the number
buttons on the remote control.
. Press the enter/oK button to confirm your setting. The message "Enjoy your viewing" is
displayed. When you have finished, press the enter/oK button.
Even if the enter/oK button is not pressed, the message will automatically disappear after
several seconds.
auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
button on the remote control.
english - 9
Plug & Play
Start Plug & Play.
oK
enter
Advertisement
Table of Contents
