Basic Features
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High)
■
the screen contrast.
Shadow Detail (-2~+2)
■
images.
✎
Disabled under PC mode.
: Adjust the primary colour intensity.
Gamma
■
Expert Pattern (Off / Pattern 1 / Pattern 2)
■
running the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
✎
While the
Expert Pattern is running, sound is not
outputted.
✎
Only enabled in DTV, Component and HDMI modes.
RGB Only Mode (Off / Red / Green / Blue)
■
adjust Colour or Tint of Red, Green or Blue for the picture
from an external device (DVD player, home theatre, etc.).
Colour Space (Auto / Native / Custom)
■
Red, Green, Blue and Reset, set Colour Space to Custom.
White Balance
: Adjust the colour temperature for a
■
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour's
(red, green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
10p White Balance (Off / On)
■
balance in 10 point interval by adjusting the red, green,
and blue brightness.
✎
Available when the picture mode is set to
and when the external input is set to all input.
✎
Some external devices may not support this function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
: Emphasize pink "Flesh Tone".
Flesh Tone
■
Edge Enhancement (Off / On)
■
boundaries.
xvYCC (Off / On)
: Setting the xvYCC mode on
■
increases detail and colour space when watching movies
from an external device (e.g. DVD player connected to
the HDMI or Component IN jacks.
✎
Available when the picture mode is set to
when the external input is set to HDMI or Component.
✎
Some external devices may not support this function.
16
English
: Select the
: Adjust
: Increase the brightness of dark
: By
: You can
: To adjust Colour,
: Controls the white
Movie
: Emphasize object
Movie and
Picture Options
✎
In PC mode, you can only make changes to the
Tone, Size or Auto Protection Time.
Colour Tone
Size
Digital Noise Filter
MPEG Nosie Filter
hDMI Black Level
POWER
P
Film Mode
Motion Plus
Colour Tone (Cool / Normal / Warm1 / Warm2)
■
✎
Warm1
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
SOURCE
0
Size
: Your cable box/satellite receiver
■
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
✎
This feature is only available in New Zealand,
Singapore.
SOURCE
0
16:9 : Adjusts the picture size to 16:9 for DVDs or wide
broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
✎
Adjusts the Position or Size by using
I-II
4:3 : The default setting for a movie or normal
broadcasting.
DUAL
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
SUBT.
✎
NOTE
x
After selecting
1080p) or Component (1080i/1080p) mode, you may
need to centre the picture:
1. Press the ◄ or ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
Picture Options
: Normal
: 16:9
: Auto
: Auto
: Normal
: Off
: Standard
U Move E Enter R Return
or Warm2 will be deactivated when the
▲, ▼ buttons.
Screen Fit in HDMI (720p / 1080i /
Colour
►
HDMI
▲, ▼ button.