Picture Menu; Economical Solutions; Changing The Picture Options - Samsung LCD TV User Manual

Channel List
You can see all the channels searched.
POWER
P
Channel List Transfer
Imports or exports the channel map. You should connect a
SOURCE
0
USB storage to use this function.
✎
The PIN number input screen appears. Enter your 4
digit PIN number.
✎
The default PIN number of a new TV set is '0-0-0-0'.
Import from USB
■
Export to USB
■
Edit Channel Number (Disable/Enable)
SOURCE
0
(New Zealand only)
When this option is enabled, you can edit channel number.
But you cannot update channel information.
Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel
I-II
manually.
DUAL
✎
Fine tuned channels are marked with an asterisk "*".
✎
To reset the fine-tuning, select
¦ Changing the Preset Picture Mode
SUBT.
Mode
t
Select your preferred picture type.
: Suitable for a bright room.
Dynamic
■
Standard : Suitable for a normal environment.
■
Natural : Suitable for reducing eye strain.
■
✎
is not available in PC mode.
Natural
Movie : Suitable for watching movies in a dark room.
■
¦ Adjusting picture settings
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
: Import channel list from USB.
: Export channel list to USB.
Reset.

Picture Menu

✎
NOTE
x
In analogue
Tint (G/R) function is not available.
x
In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
x
Settings can be adjusted and stored for each
external device connected to the TV.

Economical Solutions

¦
ECO Solution
Energy Saving (Off / Low / Medium / High / Picture Off
■
t
/ Auto)
to reduce power consumption. If you select Picture Off, the
screen is turned off, but the sound remains on. Press any
button except volume button to turn on the screen.
ECO Sensor (Off / On)
■
savings; the picture settings will automatically adapt to
the light in the room.
✎
If you adjust the
be set to Off.
Min Backlight: When ECO sensor is On, the minimum
HDMI
screen brightness can be adjusted manually.
✎
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
No-Signal Power Off (Off / 15 min / 30 min / 60 min)
■
Activates the Stand-by mode, in the case of "No Signal"
or "Check Signal Cable" status for a certain period of
time defined by the user.
✎
Disabled when the PC is in power saving mode.

Changing the Picture Options

¦
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎
In PC mode, you can only make changes to
Contrast, Gamma and White Balance.
Black Tone
Dynamic Contrast
Shadow Detail
Gamma
Expert Pattern
RGB Only Mode
Colour Space
TV, AV modes of the PAL system, the
: Adjust the brightness of the TV in order
: To enhance your power
Backlight, the Eco Sensor will
Advanced Settings
: Off
: Medium
: 0
: 0
: Off
: Off
: Native
▼
U Move E Enter R Return
English
:
Dynamic
►
15