Samsung Freezer User Manual page 8

11. Remove the hinge and the grommet from the
freezer door. Detach the left side hinge cover and
pull the wires out of the hinge cover.
Be careful not to damage the electrical wires
when removing the hinge cover.
CAUTION
12. Use wrench to separate the hinge shaft and then
flip the hinge and reattach the hinge shaft.
13. Reassemble the hinge on the freezer door by
reversing the step 11. Make sure to use right side
hinge cover (which can be found underneath the
removed plastic cover from step 2) and remove
the grommet. After reassembling the hinge, wire
and the hinge cover, switch the side from left to
the right.
Grommet
14. After switching the hinge, make sure to take out
the right side wire cover, and close it with the wire
cover on the top of freezer door.
"Cover Wire Door R" can
be found in the packaging
15. Take off the handle cover and remove the screws,
make sure to detach the caps and the handle
from the right to left side of the door. (Make sure
to cover the right side with detached caps.)
08_ setting up 08_ setting up
Hinge cover
Grommet
Handles may not have cover depending on
the models.
16. Switch the hinge cap and attach the front leg
cover. Carefully put the freezer door back on.
Hinge cap
17. Tighten the 3 bolts and then connect the wires
back together.
Make sure your freezer is unplugged before
handling electrical wires.
WARNING
18. Connect the wire on the plastic cover and put the
cover back to its original position.
19. Tighten 2 screws back to its place.
• After reversing the door, make sure rubber
door seal is properly arranged.
CAUTION
• If the product makes noise after reversing
the door, apply some oil on the door seal.