setting the sound Edit
4.
Press the
▲▼ buttons to select sound Edit,
then press the EntER or + button.
5.
Press the
▲▼ buttons to select the desired Speaker,
then press the _+ button to adjust the settings.
6.
When done, use the
▲▼_+ buttons to select save,
then press the EntER button.
If you don't want to save your settings, use the ▲▼_+
buttons to select Cancel, then press the EntER button.
M
`
Press the
RETURN butt on to return to the previous menu.
adjusting Front/surround speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
adjusting Centre/surround/subwoofer speaker level
• The volume level can be adjusted in steps from +6dB to
6dB.
• The sound gets louder as you move closer to +6dB and
quieter as you get closer to -6dB.
Dsp(smart sound) Function
This will regulate and stabilize the volume level against a
drastic volume change when changing channels or during a
scene transition.
Press the Dsp button.
•
Each time the button is pressed, the selection changes as
follows:
s.sounD on s.sounD oFF
aV sync
Music
test tone
System Setup
Photo
Language Setup
speaker Distance
sound Edit
Setup
Audio Setup
_
DVD
Display Setup
HDMI Setup
Network Setup
Parental Setup
aV sync
Music
speaker Edit
test tone
System Setup
Photo
Language Setup
speaker Distance
Setup
Audio Setup
_
sound Edit
DVD
Display Setup
HDMI Setup
Network Setup
Parental Setup
Save
Cancel
▲
moVE
aDJust
REtuRn
▼
: 50msec
+
: 50msec
+
39