Samsung Refrigerator User Manual page 62

1. Touch the
2. Touch Wi-Fi Networks in the Settings list.
3. Choose the wireless AP you want to connect to.
• : Locked with Security Code
•
: Signal Strength
• You can check the MAC address of the Fridge on the
bottom of the Screen.
• If there are no APs showing on the screen, touch the Search button, and then select the Search
menu at the bottom.
• Depending on the wireless AP type, the refrigerator may not make a connection.
We recommended you use a wireless AP that supports IEEE 802.11 b/g.
• If you don't have a wireless router, please contact your internet provider or purchase and install one
yourself.
• If you can't remember the name of your wireless network system (SSID) or its security code, please
see the user manual of your router.
• Radio frequency signals can interfere with any the wireless network system and they may affect the
network performance of your refrigerator.
• Obstacles such as concrete walls and metallic doors and radio and microwave interference from
devices such as microwave ovens can affect the operation of your wireless network system.
• Depending on the type and location of your wireless network system and the surrounding
environment, the range and quality of your wireless network may vary.
4. If your wireless network has a security code enter the
security code, and then select the OK button.
In most cases, after you have entered the security
code, the refrigerator acquires the Network addresses
it needs (IP Address, Subnet Mask, Gateway, and DNS)
to connect to the network. If it does not or you need to
enter these values manually, go to Step 6.
62_ operating
DA68-02520A(0.4).indb 62
button in the bottom right corner of the Settings list.
2011.6.8 8:41:37 AM