Power Control - Samsung VACUUM CLEANER Operating Instructions Manual

2-5 POWER CONTROL

1) BODY-CONTROL TYPE
MIN = For delicate surface e.g. net curtains.
MAX = For hard floors and heavily soiled carpets.
2) REMOTE-CONTROL TYPE (INFRARED-CONTROL)
SENDER
HANDLE CONTROL
NOTE :
1. When using the control button for suction power, make sure that the transmitter of the
remote controller not be blocked by your body.
2. When operating the cleaner in a room with a high ceiling or under intensive light, the
suction power controlling button may not work properly. So,use the "Power Control"
button on the main body
3. When the battely is run down, it does not work with the button pressed on the handle con-
trol part. In this case, replace the battery. (How to change: Refer to User Manual No5.)
AUTO MODE (OPTIONAL)
SENDER
CONTROL
BUTTON
1. If pressing the "AUTO BUTTON" of the han-
dle, "AUTO-LAMP"of the main body turns on
and operates.
2. AUTO-MODE adjusts absorption power
depending on increase or decrease of sucked
dusts to maintain optimum cleaning status.
3. The "Power +/-button"can adjust power to
MIN/MID/MAX.
5
Press Power Control button
repeatedly to select correct mode.
(STOP → MIN → MID → MAX→ STOP)
RECEIVER