Making Small Adjustments Between Doors - Samsung RSE8KPPS1/XEP Owner's Manual And Installation

ADJUST THE CLEARANCE BETWEEN THE DOORS

Making small adjustments between doors.

If the door of the freezer is lower than that of
the refrigerator.
Adjustment part
Please open the doors and adjust the doors as follows:
1) Release the nut ( ) on the lower hinge until the upper end of the bolt ( ).
When you release the nut( ), use enclosed hex wrench ( ) to turn the bolt( ) a little
counter clockwise. Loosen the nut( ) with your finger.
NOTE
2) Please adjust the height difference between the doors turning the bolt ( ) clockwise(
clockwise ( ).
When you turn clockwise (
NOTE
3) After adjusting the doors, turn the nut ( ) clockwise(
bolt again with the wrench ( ) to fix the nut( ).
If you do not fix the nut ( )firmly, the bolt ( ) may be released.
NOTE
If the door of freezer is higher than that of the
refrigerator.
WRENCH
BOLT
NUT
), the door goes up.
WRENCH
BOLT
NUT
) until the lower end of the bolt, then tighten the
WRENCH
BOLT
NUT
27
Adjustment part
) or counter