Making Small Adjustments Between Doors - Samsung RS21DPSM Owner's Manual And Installation

ADJUST THE CLEARANCE BETWEEN THE DOORS

Making small adjustments between doors.

Adjustment part
➂ WRENCH
➀ NUT
➁ BOLT
➂ WRENCH
➁ BOLT
➂ WRENCH
➀ NUT
➁ BOLT
If the door of freezer is higher than that of the refrigerator.
Please open the doors and adjust the doors as follows:
1) Release the nut (①) on the lower hinge until the upper end
of the bolt (➁).
When you release the nut( ① ), use enclosed hex wrench ( ➂ ) to turn
the bolt( ➁ ) a little counter clockwise to make the nut( ① ) loose with
NOTE
your fingers.
2) Please adjust the height difference between the doors turning
the bolt (➁) turn clockwise (
( ).
When you turn clockwise (
NOTE
3) After adjusting the doors, turn the nut (①) turn clockwise
( ) until the lower end of the bolt, then tighten
the bolt again with the wrench (➂) to fix the nut(①).
If you do not fix the nut ( ① ) firmly, the bolt ( ➁ ) may be released.
NOTE
28
) or counter clockwise
), the door goes up.