Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung Plasma TV User Manual

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the power cord and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting Store Demo
or Home Use
2
Selecting a country
3
Selecting a channel
4
Setting the Clock
Mode
5
Viewing the HD
Connection Guide.
6
Enjoy your TV.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0." If you want to
change the PIN number, use the Change PIN function.
6
English

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y Return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When the OSD
volume is displayed, press and hold
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
Press the ▲ or ▼ button, then press the ENTERE button.
After selecting the channel source to memorise, select Search. For more information, refer
to Channel → Auto Store (p. 11).
✎
Press the ENTERE button at any time to interrupt the memorisation process.
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button to select Auto, then press the ENTERE button.
y Auto: Allows you to select a time zone.
✎
Press the ▲ or ▼ button to highlight the time zone for your local area. Press the
ENTERE button. (Australia only)
y Manual: Allows you to manually set the current date and time (p. 17).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
VHF/UHF Antenna
or
MENU for 5 sec.
Cable
ANT OUT