S.vol (Smart Volume; P.bass; Audio Upscaling; Basic Use Cd Ripping - Samsung HT-X725 User Manual

Convenient function

S.VOL (SMArT VOLUME)

This will regulate and stabilize the volume level against a drastic
volume change in case of a channel change or scene transition.
Press the S.VOL button.
Each time the button is pressed, the selection changes as
~
follows :
S.VOL On  S.VOL OFF

P.BASS

P.BASS function stresses low tones providing thudding
sound effects.
Press the P.BASS button to select P.BASS mode.
P BAS On  P BAS OFF
M
`
The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd and wma. Press
P.BASS button and "POWER BASS ON" will be displayed on the screen.
`
The P.BASS does not work with DSP/EQ or DOLBY PRO LOGIC ll modes. If you press P.BASS in the DSP/EQ
mode, the DSP/EQ mode is automatically shut off and the P. BASS function comes on.

AUDIO UPSCALInG

This also helps enhance your sound experience (ex. mp3 music).
Use this if you want to hear a better sound from a low-quality
mp3 source.
Press the AUDIO UPSCALInG button.
Each time the button is pressed, the selection changes as
~
follows :
 UPSC OFF
UPSC On 
0

BASIC USE CD rIPPInG

Converts audio sound of the CD into a MP3 fi le format before sending to a USB storage device.
B
1. Connect the USB device.
. Insert the audio CD into the CD tray.
. Press the CD RIPPING button.
To start ripping the current track, press the CD RIPPING
~
button on the remote control while the system is playing a
track or stopped temporarily.
~ To rip the whole tracks of the CD, press and hold the CD
RIPPING button on the remote control.
The system displays a message of "CD RIPPING" on the
~
display and starts ripping.
4. Press the STOP (@) button to stop ripping.
When the CD ripping is done, a directory named
~
"RIPPING" will be created in the USB device and the
ripped fi le will be saved in a format of "SAM_XXXX".mp3".
M
` Do not disconnect the USB connection or the power cable during the CD ripping.
Otherwise, it may cause damage to the data. To stop CD ripping, press the STOP button
and disconnect the USB device after the system stops playing the CD completely.
` If you disconnect the USB connection during the CD ripping, the system will turn off and you will not
be able to delete the ripped fi le. In this case, connect to a PC using the USB cable, and back up the
data and format the USB device.
`
If you connect the USB device to the system while it is playing a CD, the system stops
playing and will resume playing when the initialization of the USB connection is completed.
(The initialization time may differ depending on the type of the USB device.)
`
The feature of CD RIPPING is not applied to the DTS-CD.
` If the ripping duration is less than 5 seconds, a ripping fi le may not be created.
` CD ripping is enabled only if the USB device or the HDD is formatted in the FAT fi le
system. (The NTFS fi le system is not supported.) For a list of compliant devices, refer to
the specifi cation of the USB host.
`
The ripping is performed in a normal speed of x1 and the ripping time may be extended for
some USB devices.
` While the system is ripping a CD, the audio sound will not be output.
`
Do not put force on the system while it is ripping a CD.
1