System Setup; Setting The Language; Seting The Hdmi Video Out Mode - Samsung HT-X725 User Manual

Playback
USB Host Specification
• Supports USB 1.1 or USB 2.0 compliant devices.
• Supports devices connected using the USB A type cable.
USB Host Specification • Supports UMS (USB Mass Storage Device) V1.0 compliant devices.
• Supports the device of which the connected drive is formatted in the FAT(FAT,
FAT16, FAT32) file system.
• Does not support a device that requires installing a separate driver on the PC (Windows).
• Does not support connection to a USB hub.
Non-compliance • A USB device that is connected using the USB extension cable may not be recognized.
• A USB device requiring a separate power source needs to be connected to the
player with the separate power connection.
• If the connected device has multiple drives (or partitions) installed, only one drive
(or partition) can be connected.
Operational Limitations
• A device supporting USB 1.1 alone may cause a difference in the picture quality,
depending on the device.
Compliant Devices
1. USB Storage Device
. MP3 Player
. Digital Camera
4. Removable HDD
Removable HDDs equipped with less than 160 Gbytes are supported. Removable HDDs
~
equipped with 160Gbytes or more may not be recognized, depending on the device.
~ If the connected device does not work due to insufficient power supply, you can use a separate
power cable to supply power so that it can work properly. The connector of the USB cable may
differ, depending on the manufacturer of the USB device.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
~ The USB card reader may not be supported, depending on the manufacturer.
If you install multiple memory devices into a multi card reader, you may experience problems.
~
Compliant File Formats
File
Format File name
extension
Still Picture JPG JPG .JPEG
MP3 .MP3
Music
WMA .WMA
WMV .WMV
Movie
DivX .AVI,.ASF
~ CBI (Control/Bulk/Interrupt) is not supported.
~ Digital Cameras that use PTP protocol or require additional program installation when connected to a
PC are not supported.
A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
~
system is supported.)
~ Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
44
Sampling
Bit rate Version Pixel
Frequency
– – 640x480 –
80~384kbps – – 44.1kHz
56~128kbps V8 – 44.1kHz
4Mbps V1,V2,V3,V7 720x480 44.1KHz~48KHz
DivX3.11~
4Mbps 720x480 44.1KHz~48KHz
DivX5.1, XviD

System setup

For your convenience, you can set this Home Cinema System's features for the
best use in your home environment.

SETTInG THE LAnGUAGE

OSD(On-Screen Display) language is set to English by default.
1. In Stop mode, press the MEnU button.
. Press the Cursor % button to move to Setup and then press the
EnTEr or + button.
. Select Language and then press the EnTEr or + button.
4. Press the Cursor $,% button to select OSD Language and then
press the EnTEr or + button.
5. Press the Cursor $,% button to select the desired language
and then press the EnTEr button.
~ Once the setup is complete, the OSD will be English if
English has been selected as the language.
d Press the rETUrn button to return to the previous level.
d Press the EXIT button to exit the setup screen.
~ OSD LAnGUAGE : Selecting the OSD Language
AUDIO : Selecting the Audio Language (recorded on the disc)
~
SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
~
~ DISC MEnU : Selecting the Disc Menu Language (recorded on the disc)
 If the language you selected is not recorded on the disc, menu
language will not change even if you set it to your desired language.
~ OTHErS : To select another language, select OTHERS and
enter the language code of your country (see page 64).
AUDIO, SUBTITLE and DISC MENU languages can be
selected.

SETInG THE HDMI VIDEO OUT MODE

Selects the type of output from the HDMI/OUT jack.
~ YCbCr : Normally, select this when connecting to an HDMI device.
rGB : Gives brighter colours and deeper blacks. Select this if colours
~
are weak.
1. In Stop mode, press the MEnU button.
.
Press the Cursor % button to move to Setup and then press the
EnTEr button.
. Press the Cursor % button to move to HDMI VIDEO OUT and then
press the EnTEr button.
4. Press the Cursor $,% button to select the desired item and then press the EnTEr button.
Once the setup is complete, you will be taken to the previous screen.
~
d Press the rETUrn button to return to the previous level.
d Press the EXIT button to exit the setup screen.
MOVE ENTER RETURN EXIT
MOVE ENTER RETURN EXIT
MOVE ENTER RETURN EXIT
ENGLISH
KOREAN
ARABIC
BULGARIAN
CHINESE
CROATIAN
CZECH
MOVE SELECT RETURN EXIT
MOVE ENTER RETURN EXIT
45