Picture Options - Samsung Plasma TV User Manual

 Flesh Tone:-15~+15
You can emphasize the pink tone in the picture.
Press the ◄ or ► button until you reach the optimal setting.

Changing the adjustment value will refresh the adjusted screen.
 Edge Enhancement: Off/On
You can emphasize object boundaries.
 xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.

The xvYCC function works only in Component or HDMI mode.

Picture Options

You can set detailed picture settings.
1 Press the MENU button to display the menu.
 Press the ENTER button to select Picture.
 Press the ▲ or ▼ button to select Picture Options, then
press the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
5 When you are satisfied with your setting, press the
ENTER button.
 Press the EXIT button to exit.

In PC mode, you can only make changes to the Colour Tone,
Size and Screen Burn Protection from among the items in
Picture Options.
 Colour Tone: Cool/Cool1/Normal/Warm1/Warm

When the picture mode is set to Dynamic or Standard,
Warm1 and Warm cannot be selected.
 Size: Auto Wide/1:/Wide Zoom/Zoom/4:/Just Scan
You can select the picture size which best corresponds to your
viewing requirements.
− Auto Wide: Expanding and pulling up the picture from 4:3 to
16:9 ratio.
− 1:: Sets the picture to 16:9 wide mode.
− Wide Zoom: Magnify the size of the picture more than 4:3.
Move the screen up/down using the ▲ or ▼ button after
selecting the
− Zoom: Magnify the size of the picture vertically on screen.
− 4:: Sets the picture to 4:3 normal mode.
− Just Scan: Use this function to see the full image
without any cutoff when HDMI(720p/1080i/1080p),
Component(1080i/1080p) signals are input.
After selecting Just Scan in HDMI (100i/100p) or
Component (100i/100p) mode: Press the ◄ or ► button
to select , then press the ENTER button. Press the ▲, ▼, ◄ or ► button to move the picture
up, down, left and right. Reset: Press the ◄ or ► button to select Reset, then press the ENTER
button. You can initialize the setting.

With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off
or a specific colour appears on the screen.

For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)
connection of 50 and 60Hz, only the input source is supported.

You can change the picture size simply by pressing the P.SIZE button on the remote control.

Depending on the input source, the picture size options may vary.

The items available may differ depending on the selected mode.

When Double ( ,

In PC Mode, only "16:9" and "4:3" mode can be adjusted.
by pressing the ► or ENTER button.
) mode has been set in PIP, the Picture Size cannot be set.
English - 0
T V
Picture
Mode : Standard
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint G50
Detailed Settings
More
Move Enter
T V Picture Options
Colour Tone : Normal
Size : Auto Wide
Screen Mode : 1:
Digital NR : Auto
DNle : On
HDMI Black Level : Normal
Movie Plus : Low
Blue only mode : Off
Screen Burn Protection
Move Enter
T V Size
Auto Wide
1:
Wide Zoom
Zoom
4:
Just Scan
Move Enter
Continued...


5
45
0
50
R50

Return









Return
Return