Table of Contents
Advertisement
operating basic function
TURNING THE AIR CONDITIONER ON AND OFF
Press the Power
button on the remote control.
You will hear a beep and the air flow blade will move up and down
automatically when the air conditioner is properly on.
The air conditioner will operate in the most recent operation mode
used or Auto mode.
When you turn off the air conditioner, air flow blade will stop moving
and remain closed.
Turning on/off your air conditioner without the remote control.
You can operate your air conditioner by pressing the Power
air conditioner.
SELECTING OPERATION MODE
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending
on the room temperature detected by the room temperature sensor.
1. Turn on the air conditioner.
Press the Power
2. Set the operating mode.
Press the Mode button on the remote control until
Auto mode and Auto fan speed indicator appear on the
remote control display.
The air conditioner will automatically set the operation
mode to Cool depends on the room
temperature.
When you press the Mode button, mode will change
in order of Auto, Silence, Cool, Dry and Fan.
3. Set the Temperature.
Press the Temp
to increase or decrease the desired temperture.
You can set the desired temperature between the
range of 16˚C~30˚C.
You can increase/decrease the temperature by 1 °C .
• When the air conditioner is already operating in another mode, press the Mode button
until Auto mode indicator appears on the remote control display.
• When you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
• Air flow can be adjusted manually. (See page 18 for instructions.)
14_ operating
button on the remote control.
or
button on the remote control
button on the right bottom side of the
Advertisement
Table of Contents
